Smart city powered by RFS - Urban solutions for smart partners
RFS introduces a new range of modular urban telecom infrastructure and a variety of products and solutions to meet the needs of 4G and future 5G networks.
<b>warning: Label %flashheader.link_text% is not defined!</b>

Product Releases

Print page
  • Next Generation of RF X-TREME Base Station Antennas

    Next Generation of RF X-TREME Base Station Antennas

    New design minimizes width, supports more low band ports and provides MIMO enabling features

  • Broadcast Connector Kits for Air Dielectric Cables

    Broadcast Connector Kits for Air Dielectric Cables

    Kits Include all Necessary Components for Easier Ordering and Installation

  • RF X-TREME APXVHCWW*XD Base Station 65 &deg;Antennas

    RF X-TREME APXVHCWW*XD Base Station 65 °Antennas

    RFS’ 8-Port Broadband 65° Antenna Series Enables the Network Expansion Desired By Operators Without Increasing Costs

  • RFStar&trade; UHF Slotted Array Antenna

    RFStar™ UHF Slotted Array Antenna

    RFS Utilizes Proven “Slot” Design Technology and Applies it to their Full Range of UHF RFStar™ Antennas in USA

  • RFS Passive DAS Antennas

    RFS Passive DAS Antennas

    Four New Broadband Indoor Antennas feature PIM-Optimized Compact, Lightweight Design

  • RFS Factory-Fit Jumpers: Trust the Leader in Wireless Infrastructure

    RFS Factory-Fit Jumpers: Trust the Leader in Wireless Infrastructure

    At RFS we understand that the performance comes down to the individual elements. That’s why we invented seam-welded, corrugated coaxial cables - and continue to innovate with our exceptional line of factory-fit jumper cables.

  • CPRI Interface Panel Kits

    CPRI Interface Panel Kits

    Cost-Effective Kits Include CPRI Box and RFS’ Industry-Leading Fiber Jumpers

  • Weatherproofing Boot for Jumpers

    Weatherproofing Boot for Jumpers

    Ensures Watertight Sealing for Jumper Connections in Outdoor Applications

  • RFS Smart Pole - Modular Urban Telecom Infrastructure

    RFS Smart Pole - Modular Urban Telecom Infrastructure

    RFS introduces a new range of modular urban telecom infrastructure, including its Smart Pole solution, a highly modular platform enabling small cell deployment that combines wireless coverage, intelligent lighting, green power and smart sensors.

  • Smart city powered by RFS - Urban solutions for smart partners

    Smart city powered by RFS - Urban solutions for smart partners

    RFS introduces a new range of modular urban telecom infrastructure, including our smart pole, a green power, ibeacon system, transparent antennas, InvisiLine™ Small-Form Antennas (SFAs), auto-alignment antennas (AALs), and a variety of products and solutions to meet the needs of 4G and future 5G networks.

  • Next Generation ShareLiteTM Combiners

    Next Generation ShareLiteTM Combiners

    RFS releases products to support broader frequency ranges and auto DC sense

  • 4.3-10 Field-Installable Connectors

    4.3-10 Field-Installable Connectors

    Ultra-Stable, Low PIM Connectors Ideal Match for Coaxial Cables

  • PEP Lite Antenna Series for Broadcast Applications

    PEP Lite Antenna Series for Broadcast Applications

    RFS PEPL Antenna Panel Array Offers Lower Wind Load

  • PEP Panel Array Antennas for Broadcast Applications

    PEP Panel Array Antennas for Broadcast Applications

    RFS PEP Broadband Panel is Ideal Building Block for Integration Into Complex Antenna Arrays

  • Passive System Components for DAS

    Passive System Components for DAS

    RFS Unveils 90 New High-Performance Passive DAS Components

  • HCS Hybrid Connector

    HCS Hybrid Connector

    RFS Expands FTTA Portfolio with New HCS Hybrid Connector

  • High-Power 3dB Directional Coupler (DC618E-HP)

    High-Power 3dB Directional Coupler (DC618E-HP)

    RFS Introduces High-Power 3dB Coupler for Transmitter and Channel Combining in the UHF TV Band

  • HYBRIFLEX&trade; &ndash; Connecting People Worldwide via High-Performance Wireless Infrastructure

    HYBRIFLEX™ – Connecting People Worldwide via High-Performance Wireless Infrastructure

    For more than 100 years, RFS has been developing high-performance solutions for the telecommunications industry, offering unique, cost-effective solutions and future proof products, and helping people and organizations worldwide to communicate wherever they are.

  • Variable Gain Tower Mounted Amplifiers

    Variable Gain Tower Mounted Amplifiers

    RFS Variable Gain Tower Mounted Amplifiers Optimize Uplink Signals to Ensure Seamless Coverage

  • Ultra-Broadband RF X-TREME&trade; Triple-Band Antennas

    Ultra-Broadband RF X-TREME™ Triple-Band Antennas

    RFS’ latest additions to RF X-TREME™ product family are Ideal for triple-band site upgrades and MIMO 4x4

  • Small Form E-Band Antenna

    Small Form E-Band Antenna

    RFS’ new SFA04-W800 E-Band antenna features a lightweight, ultra-small design with excellent electrical performance

  • Low-Inductance HYBRIFLEX&trade; Cabling Solutions

    Low-Inductance HYBRIFLEX™ Cabling Solutions

    Reduced DC Cable Inductance Solves Power-Cycling Problem During Peak Traffic

  • PIM-Optimized, Plenum-Rated &frac14;&rdquo; Factory-Fit Jumpers

    PIM-Optimized, Plenum-Rated ¼” Factory-Fit Jumpers

    RFS enhances in-building portfolio with low loss, flexible jumpers ideal for tight indoor installations

  • RFS releases products for AWS-3 spectrum

    RFS releases products for AWS-3 spectrum

    RFS’ new Tower Mounted Amplifiers, Diplexers and Triplexer are designed to ensure the seamless transition from AWS to AWS-3

  • SiteExpress&trade; - Simplifies Installations with Factory-Assembled Tower Top Component Solutions

    SiteExpress™ - Simplifies Installations with Factory-Assembled Tower Top Component Solutions

    A pre-configured and tested SiteExpress™ is built with market-leading, field tested and proven wireless infrastructure solutions.

  • Digital Dehydrator

    Digital Dehydrator

    RFS's new Dehydrator simplifies configuration, enables flexibility in the field

  • 700MHz Tower Mounted Amplifiers

    700MHz Tower Mounted Amplifiers

    New RFS UltraAmp Tower Mounted Amplifiers optimize uplink signals to ensure seamless coverage

  • 700MHz RF X-TREME Base Station Antennas

    700MHz RF X-TREME Base Station Antennas

    RFS introduces FWW series of base station antennas designed for high frequency spectrum bands up to 2360 MHz

  • Weatherproofing

    Weatherproofing

    RFS introduces two new weatherproofing options for RF connections

  • E-Band Antennas for 71-86 GHz Frequency Bands

    E-Band Antennas for 71-86 GHz Frequency Bands

    RFS extends CompactLine® Easy range with 1ft and 2ft E-Band antennas for front and backhauling applications

  • Premium Performance Radiating Cable Connectors Support Quick, Easy and Reliable Installation

    Premium Performance Radiating Cable Connectors Support Quick, Easy and Reliable Installation

    RFS announces PIM-Rated Radiating Cable Connectors for highest quality connector-cable interface

  • DAS Portfolio enhanced with Low PIM Directional Couplers &amp; Power Dividers

    DAS Portfolio enhanced with Low PIM Directional Couplers & Power Dividers

    RFS Introduces More Cost-Effective Products to Support In-Building Wireless Applications

  • Bend-Insensitive Fiber Jumpers for Last Mile Fiber Connections

    Bend-Insensitive Fiber Jumpers for Last Mile Fiber Connections

    RFS introduces 100% Pre-Tested Assemblies to complement RFS’ HYBRIFLEX Portfolio

  • OMT Offering Now Available for Microwave Antennas

    OMT Offering Now Available for Microwave Antennas

    RFS introduces OMTs Compatible with Multiple Antennas – Upgrade to Four Ports/ODUs on a Single Antenna

  • HYBRIFLEX&trade; Installation Tools

    HYBRIFLEX™ Installation Tools

    Simplify Installation of HYBRIFLEX™ Hybrid Feeder Cabling Solution! Save time and money with RFS’ HYBRIFLEX Installation Tools.

  • HYBRIFLEX&trade; STANDARD / STANDARD-LTE

    HYBRIFLEX™ STANDARD / STANDARD-LTE

    HYBRIFLEX™ STANDARD and STANDARD-LTE, used with RRUs requiring 1 or 2 pairs of fiber per head, cuts installation time in half

  • DC-Fit

    DC-Fit

    DC-FIT™ converter is designed to connect a DC cable with an existing coaxial cable run. It features innovative technology that turns an existing coaxial foam dielectric feeder into a RRU power supply.

  • RF X-TREME&trade; Ultra-Broadband Antennas

    RF X-TREME™ Ultra-Broadband Antennas

    RF X-TREME UBB delivers high performance gains across both low and high frequency bands to support all LTE/4G/MIMO evolutions with a single, flexible antenna

  • SC/SCX 3ft CompactLine&reg; Easy Antennas

    SC/SCX 3ft CompactLine® Easy Antennas

    RFS introduces the industry’s most compact and lightest 3ft microwave antennas to overcome backhaul challenges and reduce total cost of ownership

  • Plenum-rated, LTE-ready antennas for In-building applications feature premium PIM-rating

    Plenum-rated, LTE-ready antennas for In-building applications feature premium PIM-rating

    New plenum-rated Omni-directional antennas can be concealed for improved aesthetics while meeting stringent building codes

  • HYBRIFLEX&trade; DIRECT-LTE

    HYBRIFLEX™ DIRECT-LTE

    HYBRIFLEX™ DIRECT-LTE, used with LTE RRHs requiring 2 pairs of fiber per head, cuts installation time in half

  • Aluminum 1/2&rdquo; Plenum-rated Wideband Cable

    Aluminum 1/2” Plenum-rated Wideband Cable

    RFS introduces ICA Lite, aluminum plenum-rated wideband coaxial cable providing a cost-effective, lighter weight alternative to copper cabling

  • Bias-Tees Ideal for LTE Network Upgrades

    Bias-Tees Ideal for LTE Network Upgrades

    Save time and money with new RFS ultra-wideband bias-tees for LTE 700 and LTE 2600

  • Dual Axis Mechanical Tilt Sensor

    Dual Axis Mechanical Tilt Sensor

    The RFS AISG 2.0 compliant, dual axis RFS Mechanical Tilt Sensor is a simple-to-install in-line device that accurately measures the position of antennas in real-time without physically having to check the placement on site.

  • PIM-Rated, LTE-Ready Indoor Antenna

    PIM-Rated, LTE-Ready Indoor Antenna

    The addition of this new PIM-certified Omni antenna, I-ATO2-698/2700JPL, for 698-2700 MHz rounds out RFS’ portfolio of products for indoor applications - which also includes plenum-rated cables, connectors, tools and jumpers – enabling RFS to provide all components required to support indoor passive DAS installations.

  • RF X-TREME&trade; Base Station Antennas

    RF X-TREME™ Base Station Antennas

    RF X-TREME™ platform for high performance multi-band capability enables LTE Evolution and capacity additions with minimal impact on current network and site designs.

  • White Jacketed &frac12;&rdquo; Plenum-Rated Wideband Cable

    White Jacketed ½” Plenum-Rated Wideband Cable

    RFS expands Passive DAS Cabling Offerings with New White Jacketed Coaxial Plenum-Rated Cable

  • Plenum-Rated Factory-Fit Jumpers

    Plenum-Rated Factory-Fit Jumpers

    Plenum-rated factory-fit jumpers provide a time-saving, cost effective, and high-performance solution and address the need for short runs of coaxial cable

  • RFS 6 GHz Category A CompactLine&reg; Antennas

    RFS 6 GHz Category A CompactLine® Antennas

    RFS Debuts 6 GHz Category A SB6-W60B Microwave Antennas with High-Speed Wind Stability Up To 250 km/h

  • RFS Plenum-Rated Cable

    RFS Plenum-Rated Cable

    The Radio Frequency Systems (RFS) plenum-rated wideband cables, tested up to 6 GHz, deliver outstanding electrical performance and support all wireless in-building applications

  • Ultra-Wideband Microwave Antenna

    Ultra-Wideband Microwave Antenna

    The new RFS microwave antennas are the first in North America to cover the unlicensed band (5.725 to 5.85 GHz), the lower 6 GHz band (5.925 to 6.425 GHz), the upper 6 GHz band (6.425 to 6.875 GHz) and the 7 GHz band (6.875 to 7.125 GHz) in a single antenna.

  • RFS WindMaster&trade; APXVLL13N-C

    RFS WindMaster™ APXVLL13N-C

    The New WindMaster TM APXVLL13N-C base station antenna from Radio Frequency Systems features best-in-class gain for exceptional coverage and a sleek new radome design that dramatically reduces wind load. This side-by-side quad antenna supports multiple technologies, such as 4xN MIMO and 4-way RX DIV, to seamlessly add capacity without increasing tower loading.

  • HYBRIFLEX&trade; cuts Remote Radio Head deployment costs

    HYBRIFLEX™ cuts Remote Radio Head deployment costs

    HYBRIFLEX brings operators the world’s first hybrid cabling solution to combine optical fiber and DC power for Remote Radio Heads (RRHs) in a single, high-performance lightweight aluminum corrugated cable.

    With RFS' patented single-cable architecture, mobile operators can connect up to three sectors with a single composite optical fiber and power cable with the grounding function incorporated directly in the cable. This breakthrough approach reduces the number of RRH cables required from nine to one to dramatically simplify and cut the costs of installation while enabling significant operational savings.

  • RFS&rsquo; Dual &amp; Quad Pol High Band Base Station Antennas with UBB Technology Ideal for LTE testing worldwide

    RFS’ Dual & Quad Pol High Band Base Station Antennas with UBB Technology Ideal for LTE testing worldwide

    Replacing or adding antennas to accommodate different technologies or frequencies delays time-to-market, is expensive and can lead to difficult negotiations with landlords. With the RFS Ultra-Broadband Antennas, operators can invest once then effectively forget about antenna replacement issues and focus on evolving their business.

  • Tower Mounted Amplifier

    Tower Mounted Amplifier

    RFS is pleased to introduce a twin GSM1800 Tower Mounted Amplifier (TMA) to their extensive line of TMAs. This TMA utilizes our new hardware platform that features a unique and extremely reliable assembly and integrations method. It is designed for 1800 MHz site deployments that require improved receiver sensitivity and enhanced site coverage.

  • OMNI FIT Premium Connectors

    OMNI FIT Premium Connectors

    RFS’ new line of RF-connectors features design breakthroughs for best-in-class performance and value. OMNI FIT Premium guarantees hassle-free installation, safe sealing, plus the lowest PIM levels in the industry.

  • Quad Pol Variable Electrical Tilt Antennas

    Quad Pol Variable Electrical Tilt Antennas

    APXVRR13-C 1710-2200 MHz - 1.3m – VET - 18dBi
    APXVRR20-C 1710-2200 MHz - 1.9m – VET - 18.7dBi

  • 700 MHz Wideband Antennas

    700 MHz Wideband Antennas

    APX75-86 Series - 698-896MHz
    40° 65° & 80° - Fixed Electrical Tilt Antennas

  • Dual Band, Variable Electrical Tilt Antennas

    Dual Band, Variable Electrical Tilt Antennas

    Dual Band 790-960 / 1710-2200 MHz - 1.3m, 2.1m, 2.7m - VET
    Tilt: 0° to 10° ; Horizontal Beamwidth: 65° ; Gain: From 15.5-19dBi

  • Peak Power+ line of filters and combiners

    Peak Power+ line of filters and combiners

    The Peak Power+ line of filters and combiners have been specifically conceived for the very high peak-to-average power ratio nature of digital television (DTV), and represent a breakthrough in coaxial filter technology.

  • High Band, Broadband Variable Electrical Tilt Optimizer&reg; Antennas

    High Band, Broadband Variable Electrical Tilt Optimizer® Antennas

    APXV18-206516H Series - 1710 - 2200 MHz - 18.1dBi - 1.3m VET
    APXV18-206517H Series - 1710 - 2200 MHz - 19.0dBi - 1.9m VET

  • CELLFLEX&reg;Lite

    CELLFLEX®Lite

    CELLFLEX®Lite is the industry’s ultimate, evolutionary, corrugated aluminium transmission line, and the lightest RF transmission cable on the market today. The light-weight design coupled with its single and multiple bending-radius capabilities, allow fast installation and make it ideal for congested tower-top applications.

  • SlimLine&reg; FCC Cat. &lsquo;A&rsquo; compliant 3ft 11GHz Dual Pol Antenna

    SlimLine® FCC Cat. ‘A’ compliant 3ft 11GHz Dual Pol Antenna

    Radio Frequency Systems’ 3ft, 11GHz -dual polarized- FCC Category A (SUX3-107BF) compliant antenna is yet another breakthrough in microwave antenna design. This addition to RFS’s SlimLine® family range continues to provide innovative solutions for point-to-point communications in the 11-GHz band, and is an ideal option for ongoing backhaul applications.

  • Optimizer CELlite BSA

    Optimizer CELlite BSA

    Assisting fast-track wireless network deployments across the globe, Radio Frequency Systems has launched the new high-performance Optimizer CELlite base station antenna (BSA) series. The slimline dual-polarized Optimizer CELlite antenna series complements RFS’s popular vertically-polarized CELlite variant, providing users with an extremely stable and lightweight antenna solution.

  • Mobile TV RF filters

    Mobile TV RF filters

    To prevent interference between co-located broadcast mobile TV and phone services, Radio Frequency Systems has developed three new mobile TV-ready RF filter solutions. The new filters—a 2kW and a 5kW low-pass filter, plus a 0.6kW UHF band-pass filter with integrated low-pass filter—deliver premium RF performance across the 470 to 862MHz band.

  • UHF mobile TV antennas

    UHF mobile TV antennas

    Radio Frequency Systems’ range of lightweight and compact UHF mobile TV antennas are specially designed for co-locating at mobile base stations. This comprehensive suite of vertically polarized omnidirectional antennas includes the ultra-lightweight HU6 series, the compact multi-channel CTV series, the cost-effective broadband MTV-4 and the high-power broadband SDV-4 antennas.

  • Network Element Manager (NEM) software

    Network Element Manager (NEM) software

    Radio Frequency Systems has launched version three of its innovative Network Element Manager (NEM) software—NEM-ALD-S 3.0. The industry’s only platform-independent network management software, NEM-ALD-S 3.0 simplifies antenna line device interrogation and streamlines network management—from set-up, through to operation.

  • Ultra-lightweight broadband WiMAX filters

    Ultra-lightweight broadband WiMAX filters

    Radio Frequency Systems has unveiled an entirely new family of dual ultra-lightweight RF filters designed for worldwide interoperability for microwave access (WiMAX) applications. Founded on the company’s patented polymer-based air-cavity filter technology, the filter family boasts a body-weight of just 300g (10 ounces)—less than 50 percent of that of competing WiMAX filter solutions.

  • Dual-band Optimizer

    Dual-band Optimizer

    The new Optimizer dual-band BSA series is one of the most compact dual-band antenna series in its class, and boasts one of the shortest dual-band antenna radomes on the market today.

  • OPTIMIZER&reg; RT

    OPTIMIZER® RT

    RFS is proud to present an AISG compliant end-to-end solution set that allows precise remote control and monitoring of tower-top RF components.

  • ClearFill&reg;Space1

    ClearFill®Space1

    The modular mid-power ClearFill®Space 1-Solution is the first fully plug-and-play system of its kind on the market and is ideal for 2G and 3G applications.

  • RFS Ferrocom ferrite devices

    RFS Ferrocom ferrite devices

    The new suite of RFS Ferrocom ferrite isolators and circulators is specially engineered to enhance stability, performance and reliability of RF systems by compensating for mismatch between system components. The devices are ideal for a wide range of commercial mobile and public safety base stations, plus RF and microwave systems.

  • CELLFLEX&reg; MicroFlex

    CELLFLEX® MicroFlex

    Representing a new milestone in the evolution of RF cables, CELLFLEX® MicroFlex brings all the benefits of the CELLFLEX® family to the ‘micro’ coaxial cable sector. The 4.2mm (1/6-inch) outer diameter foam dielectric coaxial cable features a corrugated outer conductor, rather than the braided outer of conventional ‘conformable’ cables.

Explore

Explore