APXTM14H-CT6
TD-LTE Beamforming Cross Polarized 8 port Antenna, 1.4m, 65 Deg., Fixed Tilt 6 degree1880-1920(F) / 2010-2025(A) / 2575-2635MHz(D)

This antenna is an ideal choice for advanced TD-LTD site, supporting beamforming and MIMO applications.

It provides 8 ports within a 1.4m length antenna, covering major TDD frequency bands including 1880-1920(F)/2010-2025(A)/2575-2635MHz(D).

FEATURES / BENEFITS

• 8-port multiband platform for advanced TD-LTE application

• 1 calibration port for precise steering
• Effective polarization diversity ensured by high cross-polar discrimination

• Broadband design

• Fixed tilt at 6 degree

• Optimized mechanical design for low windload

• Mounting hardware included

Technical features

Electrical Specifications - 01
Electrical Specification Header 1		General parameters
Frequency range	MHz	1880-1920 (F)	2010-2025 (A)	2575-2635 (D)
Polarization	degree	Slant ± 45	Slant ± 45	Slant ± 45
Fixed down tilt	degree	6	6	6
VSWR		< 1.5:1	< 1.5:1	< 1.5:1
Impedance	ohm	50	50	50

Electrical Specifications - 02
Electrical Specification Header 2		Calibration and Electrical Parameters
Transmission from any column ports to calibration port	dB	-26±2	-26±2	-26±2
Amplitude difference between any two column’s ports and calibration port	dB	< 0.7	< 0.7	< 0.7
Phase difference between any two column’s ports and calibration port	degree	< 5	< 5	< 5
Same polarization isolation	dB	> 28	> 28	> 28
Different polarization isolation	dB	> 30	> 30	> 30

Electrical Specifications - 03
Electrical Specification Header 3		Unit Beam
Horizontal beamwidth	degree	100 ± 15	90 ± 15	65 ± 15
Gain	dBi	≥ 13.5	≥ 14.5	≥ 15.5
Cross-polar ratio on main axis	dB	≥ 18	≥ 18	≥ 18
Cross-polar ratio @ ±60°	dB	≥ 10	≥ 10	≥ 10
Front to back ratio	dB	≥ 23	≥ 23	≥ 25

Electrical Specifications - 04
Electrical Specification Header 4		Broadcast Beam
Horizontal beamwidth	degree	65 ± 5	65 ± 5	65 ± 5
Gain	dBi	≥ 13.5	≥ 14	≥ 14.5
The reduce of power @ ±60° on H-beam	dB	12 ± 3	12 ± 3	12 ± 3
Vertical beamwidth	degree	≥ 7	≥ 6.5	≥ 5
Cross-polar ratio on main axis	dB	≥ 22	≥ 22	≥ 22
Cross-polar ratio @ ±60°	dB	≥ 10	≥ 10	≥ 8
Front to back ratio	dB	≥ 28	≥ 28	≥ 25
Upper sidelobe suppression	dB	≤ -16	≤ -16	≤ -16

Electrical Specifications - 05
Electrical Specification Header 5		Service Beam
Frequency range	MHz	1880-1920 (F)	2010-2025 (A)	2575-2635 (D)
Gain @ 0°	dBi	≥ 20	≥ 21	≥ 22
Horizontal beamwidth @ 0°	degree	≤ 29	≤ 26	≤ 25
Side lobe suppression @ 0° on H-pattern	dB	≤ -12	≤ -12	≤ -12
Gain@ ±60°	dBi	≥ 17.5	≥ 17.5	≥ 17.5
Horizontal beamwidth @ ±60°	degree	≤ 32	≤ 32	≤ 23
Side lobe suppression @ 60° on H-pattern	dB	≤ -5	≤ -5	≤ 0
Cross-polar ratio on main axis	dB	≥ 22	≥ 22	≥ 22
Front to back ratio @ 0°	dB	≥ 28	≥ 28	≥ 28

Mechanical Specifications
Dimensions - H x W x D	mm (in)	1405 x 323 x 112 (55.3 x 12.7 x 4.4)
Weight (Antenna Only)	kg (lb)	15.6 (34.4)
Weight (Mounting Hardware only)	kg (lb)	4.6 (10.1)
Packing size- HxWxD	mm (in)	1525 x 404 x 234 (60 x 15.9 x 9.2)
Shipping Weight	kg (lb)	22.6 (49.8)
Connector type		(9) N-Female
Mounting Hardware Material		Diecasted Aluminium and Galvanized Steel
Radome Material / Color		UPVC / Light Grey RAL7035

Testing and Environmental
Temperature Range	°C (°F)	-55 to 75 (-67 to 167 )
Lightning protection		Direct Ground
Survival/Rated Wind Velocity	km/h	200 (150 )
Wind Load @Rated Wind Front	N	986
Wind Load @Rated Wind Side	N	718
Wind Load @Rated Wind Rear	N	530
Survival wind Velocity	km/h	200

Ordering Information
Order No.	Configuration	Mounting Hardware	Mounting pipe Diameter	Weight
APXTM14H-CT6	Fixed tilt (6°) antenna. Mounting kit included	APM40-6C	50-114 mm	22.6Kg (49.8Lb)

External Document Links

Notes

Antennas with different tilts are available to meet diversed site requirements:

APXTM14H-CT6TD-LTE Beamforming Cross Polarized 8 port Antenna, 1.4m, 65 Deg., Fixed Tilt 6 degree1880-1920(F) / 2010-2025(A) / 2575-2635MHz(D)