Radio Frequency Systems company website is optimized for recent browsers :
IE9+, Chrome 31+, Firefox 31+, Opera 28+, Safari 7+


My e-catalog

APXV3RR13A_43-C-A20
Twin Beam Dual Polarized Antenna, 1710-2170, 33deg, 20dBi, 1.3m, VET, 0-10deg

This twin beam (split beam) antenna offers excellent horizontal and vertical pattern control in 2 sectors with 60 degrees of separation in azimuth. It is ideal choice for ultra-high dense urban areas. It provides a solution to easily upgrade from a standard 3 sector site to a 6 sector site without adding additional antennas. The wideband design allows the antenna to be used in the 1800, 1900, and 2100 MHz bands. Additionally, two sectors can be vertically electrical tilted independently.

FEATURES / BENEFITS

  • Twin beam (split beam) with 4 ports — supports two 33 degree sectors with 60 degrees of separation in azimuth
  • High gain design — ideal for coverage penetration
  • Independent electrical downtilt — allows for greater flexiblity in system design
  • High suppression of upper sidelobes — reduces cell interference
  • Designed with low windload — minimizes tower loading

 

Technical features

Electrical Specifications

Electrical Specification HeaderELECTRICAL SPECIFICATIONS Y1
Frequency Band Mhz 1710-1890 1850-1990 1920-2170
Polarization - Slant +/- 45 Slant +/- 45 Slant +/- 45
Impedance Ohms 50 50 50
Passive Intermodulation dBc <-150 <-150 <-150
Maximum Effective Power per Port Watts 300 300 300
Gain dBi 19.9 19.9 20.6
VSWR - <1.5:1 <1.5:1 <1.5:1
Return Loss dB >14 >14 >14
Cross Polar Isolation dB >30 >30 >30
Azimuth Beamwidth 3dB Deg 37.1+/-1.9 35.8+/-0.8 34.2+/-2.4
Front-To-Back, at +/-30 Total Power dB >24 >24.3 >24.3
Elevation Beamwidth 3 dB Deg 7.9+/-0.4 7.5+/-0.4 7+/-0.6
Electrical Downtilt Deg 0 to 10 0 to 10 0 to 10
Elevation Downtilt Deviation Deg <0.45 <0.34 <0.44
First Upper Side Lobe Suppression dB >18.8 >15.6 >15.5

Electrical Specifications

Electrical Specification HeaderELECTRICAL SPECIFICATIONS Y2
Frequency Band Mhz 1710-1890 1850-1990 1920-2170
Polarization - Slant +/- 45 Slant +/- 45 Slant +/- 45
Impedance Ohms 50 50 50
Passive Intermodulation dBc <-150 -150 -150
Maximum Effective Power per Port Watts 300 300 300
Gain dBi 19.9 19.9 20.6
VSWR - <1.5:1 <1.5:1 <1.5:1
Return Loss dB >14 >14 >14
Cross Polar Isolation dB >30 >30 >30
Azimuth Beamwidth 3dB Deg 36.9+/-1.7 35.4+/-0.8 33.9+/-2.1
Frotn-To-Back, at +/-30 Total Power dB >24.2 >24.4 >24.4
Elevation Beamwidth 3 dB Deg 7.9+/-0.5 7.3+/-0.4 6.8+/-0.7
Electrical Downtilt Deg 0 to 10 0 to 10 0 to 10
Elevation Downtilt Deviation Deg <0.58 <0.6 <0.84
First Upper Side Lobe Suppression dB >19.4 >17.6 >16.7

Mechanical Specifications

Dimensions - H x W x Dmm (in)1360 x 400 x 160 (53.5 x 15.7 x 6.3)
Weight (Antenna Only)kg (lb)23.6 (52)
Weight (Mounting Hardware only)kg (lb)6.5 (14.3)
Packing size- HxWxDmm (in)1520 x 520 x 320 (59.8 x 20.5 x 12.6)
Shipping Weightkg (lb)33.7 (72.3)
Connector type4.3-10
Adjustment mechanismExternal Ret solution
Radome Material / ColorFiberglass / Light Grey RAL7035

Testing and Environmental

Temperature Range °C (°F)-40 to 70 (-40 to 158 )
Lightning protectionDirect Ground
Survival/Rated Wind Velocitykm/h200 (160 )
Wind Load @Rated Wind FrontN740
Wind Load @Rated Wind SideN333
Wind Load @Rated Wind RearN740
Survival wind Velocity km/h200

Ordering Information

Order No. Configuration Mounting Hardware Mounting pipe Diameter Weight
APXV3RR13A-C Manual tilt control Included 50-115mm 33.7 kg
APXV3RR13A-C-A20 External RET included Included 50-115mm 34.7 kg

External Document Links

Notes

Models Available

APXV3RR13A-C: No ACU included (33.7kg, including mounting hardware)

APXV3RR13A-C-A20: (2) Pre-commissioned external ACUs included (34.7kg, including mounting
hardware)

 
All electrical parameters are following NGMN 9.6 BASTA requirements
 
Preliminary datasheet - Data might be subject of modification