Radio Frequency Systems company website is optimized for recent browsers :
IE9+, Chrome 31+, Firefox 31+, Opera 28+, Safari 7+


My e-catalog

BD4200W Series
Dehydrator for broadcast applications

Rev : 02 | Rev date : 19 Apr 2022

PRODUCT DESCRIPTION

The BD4200W series dehydrators are used for pressurisation of broadcast antennas and transmission lines. The dehydrator removes the moisture from damp ambient air to deliver a reliable, constant, on-demand source of dry, pressurised air. 
The inherent reliability of the BD series design, combined with the high output capacity make these units an ideal choice for pressurisation of broadcast systems. Low pressure systems (suffix LP) are available for applications where reduced pressure is required, for example; pressurisation of broadcast antenna radomes, broadcast waveguide transmission lines or broadcast STL systems.
The BD4200W Series dehydrators employ a fully digital operating platform offering the most accurate readings of operating variables, either from the front panel or by a remote connection.

FEATURES / BENEFITS

  • Accurate Humidity Sensing within ±0.1% RH
  • Digital Display of All Operating Parameters
  • Remote Real-Time Data and Alarm Reset Capabilities
  • SNMP Communication Compatible
  • Remote Access via Web Browser Interface
  • Imperial and Metric Unit of Measure Options
  • 8,000 Hour Maintenance Interval
  • Quietest Dryer on the Market
     

Details 

Product Type   Automatic Dehydrator

Specifications 

    BD4200W BD4200WLP BD4202W BD4202WLP
Output Capacity

l/hr
(SCFD)

Normal: 3068 (2600) Continuous
Maximum: 4955 (4200)  Emergency
Power Requirements   110 - 125 VAC, 50 / 60Hz
(15 Amp service recommended)
208 - 253 VAC, 50 / 60Hz
Operating Current A 8.6 3.9
Outlet Pressure Range kPa
(PSIG)
35 - 138
(5 - 20)
2.0 - 69
(0.30 - 10)
35 - 138
(5 - 20)
2.0 - 69
(0.30 - 10)
Outlet Air Relative Humidity   Less than 2% RH
Compressor Type   Two-cylinder, 3/4 HP, Oil-less Type
Dehydrating Method   Heatless Desiccant
Environment Operating Temperature Range °C (°F) 5°-30° (40°-85°)  Ambient
*Unit will go into SHUTDOWN mode if cabinet temperature exceeds 49° (120°)
Noise Level at 3m (10ft) dBA 63
Heat Dissipation

kW
(BTU/hr)

1.0
(3500)
0.85
(2900)
Alarms   Standard Alarm - Complete readings of all critical measurement points,
individual alarm indication display, including SNMP communication
Outlet Connections   1/2" NPT female
Dimensions
Depth x Width x Height
cm (in) 53.3 x 64.8 x 124.5 (21 x 25.5 x 49)
Weight kg (lb) 100 (222)

Accessories 

Kit Number   Description
GLK2 [Note 1] Gas Line and accessories kit for BD4200 & BD8400 Series dehydrators
P011752   Installation Kit
P012314   6 Month Maintenance Kit
P011471   8000 Hour Maintenance Kit

Additional Accessories 

Kit Number   Description
PWM2G   2-Port Manifold with Pressure Gauges
PWM2GC [Note 2] 2-Port Manifold with Pressure Gauges & Check Valves
PWM4G   4-Port Manifold with Pressure Gauges
PWM4GC [Note 2] 4-Port Manifold with Pressure Gauges & Check Valves
PWM8G   8-Port Manifold with Pressure Gauges
PWM8GC [Note 2] 8-Port Manifold with Pressure Gauges & Check Valves
P8741SFM   Single Pipe Panel
P8741DFM   Dual Pipe Panel
PFMP2310   Flow Distribution Panel

Note:
1. GLK2 Kit contains: 50' of 3/8" tube, 1/8 NPT Gas inlet port for RF connector, Adapter (1/2" - 3/8"), Ball valve, 3/8" & PTFE tape.
2. Manifold units with check valves are not recommended for pressurising antennas with dual feedlines.   

Screen image showing remote display of dehydrator status and alarms

PWM4G :  4-Port Manifold with Pressure Gauges