UCF114-50JFNA-BAA
1-1/4" CELLFLEX^® Premium Attenuation Ultraflexible Low-Loss Foam-Dielectric Coaxial Cable, BAA Compliant

CELLFLEX®1-1/4" premium attenuation low loss Ultraflexible cable

FEATURES / BENEFITS

BAA Compliant
RFS is proud to announce that the product of UCF114-50JFNA-BAA manufactured by RFS Meriden in CT, U.S. is BAA compliant with Federal Transit Administration's requirements.
Ultra Low Attenuation
The further reduced attenuation of CELLFLEX® premium attenuation coaxial cable results in extremly efficient signal transfer in your RF system, especially at high frequencies.
Complete Shielding
The solid outer conductor of CELLFLEX® coaxial cable creates a continuous RFI/EMI shield that minimizes system interference.
Low VSWR
Special low VSWR versions of CELLFLEX® coaxial cables contribute to low system noise.
Outstanding Intermodulation Performance
CELLFLEX® coaxial cables solid inner and outer conductors virtually eliminate intermods. Intermodulation performance is also confirmed with state-of-the-art equipment at the RFS factory.
High Power Rating
Due to their low attenuation, outstanding heat transfer properties and temperature stabilized dielectric materials, CELLFLEX® cable provides safe long term operating life at high transmit power levels.
Wide Range of Application
Typical areas of application are: feedlines for broadcast and terrestrial microwave antennas, wireless cellular, PCS and ESMR base stations, cabling of antenna arrays, and radio equipment interconnects.

1-1/4" CELLFLEX® Low-Loss Ultraflexible Foam Dielectric Coaxial Cable

Technical features

Applications
Applications		Indoor	Wireless Communication	TV & Radio	HF Defense	Mobile Radio	Cable Solutions

Testing and Environmental
Flame Retardant, LSZH
Meets/Exceeds: IEC 60754-1, -2; IEC 60332-1, -3.C; UL 1581; UL 1666; NFPA130; NEC type CATVR
-25 to 60 (-13 to 140)	-70 to 85 (-94 to 185)	-50 to 85 (-58 to 185)

Electrical Specifications
Impedance, Ohm	Ω	50 +/- 1
Maximum Frequency	GHz	3.3
Velocity, percent	%	89
Capacitance	pF/m (pF/ft)	75 (22.9)
Inductance, uH/m (uH/ft)	µH/m (µH/ft)	0.184 (0.056)
Peak Power Rating	kW	178
RF Peak Voltage	Volts	4200
Jacket Spark	Volt RMS	10000
Inner Conductor dc Resistance, Ω/km (Ω/kft)	Ω/1000 m (Ω/1000 ft)	1.94 (0.59)
Outer Conductor dc Resistance, ohm/1000 m (Ohm/1000 ft)	Ω/1000 m (Ω/1000 ft)	0.55 (0.17)
Return Loss (VSWR) Performance		Standard
Min. Return Loss (Max. VSWR)	dB (VSWR)	18 (1.288)
Phase Stabilized		Phase stabilized and phase matched cables and assemblies are available upon request.
Temperature & Power		Standard

Mechanical Specifications
Cable Weight, Nominal	kg/m (lb/ft)	0.79 (0.53)
Minimum Bending Radius, Single Bend	mm (in)	150 (6)
Minimum Bending Radius, Repeated Bends	mm (in)	250 (10)
Bending Moment, Nm (lb-ft)	Nm (lb*ft)	36 (25.6)
Tensile Strength	N (lb)	2900 (650)
Recommended / Maximum Clamp Spacing	m (ft)	1 / 1.2 (3.25 / 4)

Attenuation and Power Rating
Frequency, MHz	dB per 100m	dB per 100ft	Power, kW
0.5	0.06	0.02	178
1	0.08	0.03	131
1.5	0.10	0.03	107
2	0.12	0.04	92.30
10	0.27	0.08	41
20	0.38	0.12	28.80
30	0.47	0.14	23.40
50	0.61	0.19	18
88	0.82	0.25	13.50
100	0.88	0.27	12.60
108	0.91	0.28	12.10
150	1.09	0.33	10.20
174	1.17	0.36	9.42
200	1.26	0.39	8.75
300	1.57	0.48	7.05
400	1.83	0.56	6.04
450	1.95	0.59	5.67
500	2.06	0.63	5.35
512	2.09	0.64	5.29
600	2.28	0.70	4.85
700	2.48	0.76	4.45
800	2.67	0.82	4.14
824	2.72	0.83	4.07
894	2.84	0.87	3.89
900	2.85	0.87	3.87
925	2.90	0.88	3.81
960	2.96	0.90	3.74
1000	3.03	0.92	3.65
1250	3.43	1.05	3.22
1500	3.81	1.16	2.90
1800	4.23	1.29	2.61
2000	4.50	1.37	2.46
2200	4.75	1.45	2.33
2300	4.88	1.49	2.27
3000	5.71	1.74	1.94
3300	6.04	1.84	1.83

External Document Links

Notes

UCF114-50JFNA-BAA1-1/4" CELLFLEX® Premium Attenuation Ultraflexible Low-Loss Foam-Dielectric Coaxial Cable, BAA Compliant