GIBSONXF4
Automatic Dehydrator, 230 VAC
Rev : A | Rev date : 23 May 2024
The GIBSON X F4 Automatic Pressurization Dehydrator is designed to protect air dielectric cable systems up to 950 l.
The dehydrator includes a self contained completely automated air drying system that utilizes a pressure swing moisture absorption cycle to provide pressurized dry air. This eliminates the need for replacement or manual reactivation of the desiccant and together with the flowmeter leakage monitoring makes the GIBSON X F4 dehydrator ideal for unattended operation.
The diaphragm pumps hold a pressure of 12 kPa.
FEATURES / BENEFITS
- Flow rate 250 Nl/h +/- 10%
- dew point better than -40°C @ 30°C Ambient temperature and 85° relativ humidity
- two pumps each with one drying chambers running alternatively
- drying chamber automatic regeneration
- microprocessor controls low pressure and power failure alarm
- local alarm signalling
- mounting: wall, floor, 19" rack
- including flowmeter for leakage easy detection
General Specifications |
|---|
| Product Type | | Automatic Dehydrator | | max. System Volume @Sea Level | l | 950 | | Output Capacity | l/h | 250 | | Output Pressure | kPa (PSIG) | 11 kPa factory pre-adjusted | | Output Dew Point | °C | -40 | | Number of Outlets | | 4 | | Output Fitting | | 10 mm OD tube or adapter |
|
ELECTRICAL SPECIFICATIONS |
|---|
| Operating Voltage | V | 230 V AC | | OperatingCurrent | A | 0.15 |
|
Mechanical Specifications |
|---|
| Dimension H x D x W | cm | 13.3 x 34.5 x 48.2 (wall mount) 13.3 x 30.5 x 48.2 (19" rack mount) | | Weight | Kg | 11 |
|
Environmental |
|---|
| Ambient Temperature Range | °C | -10 to +40 |
|
Alarms |
|---|
| Alarm | | Summary alarm provided by internal SPDT (Single Pole Double Throw) relay contacts.
Power failure
Low pressure alarm (pressure < 7 kPa and restored at >8 kPa)
High humidity, visual monitoring with humidity indicator by changing salt's color.
Leakage monitor by flow meter (range 0 - 25 l/h) |
|
Accessories |
|---|
| Model Name | Description | | TUBE-01-G18 | Gas inlet adaptor G 1/8" for 6mm tube | | TUBE-0816 | Tube Clamp, 8-16 mm | | TUBE-SEAL | Teflon Tape 10mm, 12m |
|
Notes
Delivery includes following accessories:
1x Power connector : IEC socket
1x Alarms connector : female connector with plastic case
25 meter Tube PR-5 or MB Ø10 mm.
4x Output angle adapters : plastic L code H2291(Dehydrator side)
4x Quick release union elbow : code H22106 (Cables side)
4x Adapters for cables connectors : code H0905 (1/8” thread)
