ANGLE-CLPI
Angle Member Adapter Kit 3/8" (SS) (Kit of 10)
- Package Quantity : 10
TML Value Proposition
Clamps
Cable hanger, non-insulated, bolt-on, for E38 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E46 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E60 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E78 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1 1/4" coaxial cable and eliptical waveguide E65 and E70
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E185 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 2 1/4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Cable hanger with clamp lining for twistflex R70
Cable hanger with clamp lining for twistflex R320
Cable hanger with clamp lining for twistflex R260
Cable hanger with clamp lining for twistflex R220
Cable hanger with clamp lining for twistflex R140
Cable hanger with clamp lining for twistflex R120
Cable hanger with clamp lining for twistflex R100
Cable hanger with clamp lining for twistflex R84
Cable hanger with clamp lining for twistflex R48
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 5" coaxial cable
Cable hanger, non-insulated, bolt-on, for 7/8" coaxial cable and E100, E105 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1/2" coaxial cable and elliptical waveguide
BHA8-030-C
Basic hanger adapter with cleat, 300mm (11.8"), M8
- Package Quantity : 1
TML Value Proposition
Installation Hardware
Ceiling adapter, 305mm (12") (kit of 5), 3/8"
Ceiling adapter, 610mm (24") (kit of 5), 3/8"
CLAMP-038
Cable hanger, non-insulated, bolt-on, for E38 elliptical waveguide
- Hanger Type : Bolt-On, non-insulated
TML Value Proposition
Clamps
Cable hanger, non-insulated, bolt-on, for E46 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E60 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E78 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1 1/4" coaxial cable and eliptical waveguide E65 and E70
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E185 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 2 1/4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide ES46
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E220
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E185
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E150
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E130
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E105
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E100
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E78
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E70
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E65
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E60
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E38
Cable hanger with clamp lining for twistflex R70
Cable hanger with clamp lining for twistflex R320
Cable hanger with clamp lining for twistflex R260
Cable hanger with clamp lining for twistflex R220
Cable hanger with clamp lining for twistflex R140
Cable hanger with clamp lining for twistflex R120
Cable hanger with clamp lining for twistflex R100
Cable hanger with clamp lining for twistflex R84
Cable hanger with clamp lining for twistflex R48
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 5" coaxial cable
Cable hanger, non-insulated, bolt-on, for 7/8" coaxial cable and E100, E105 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1/2" coaxial cable and elliptical waveguide
Installation Hardware
Angle Member Adapter Kit 3/8" (SS) (Kit of 10)
Ceiling adapter, 305mm (12") (kit of 5), 3/8"
Ceiling adapter, 610mm (24") (kit of 5), 3/8"
Wall Feedthrough Sealing
Wall/Roof Feedthrough E38/EP38
Wall Feed Thru for FLEXWELL® Elliptical Waveguide E38
Grounding Kit
Grounding Kit Pre-formed Copper Strap for E38
Grounding kit for FLEXWELL® Elliptical Waveguide E38
Tools
Flanging die for use with FLEXWELL® waveguide E38, basic tool
Basic tool for E38 to E130
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Lace-Up
CLAMP-046
Cable hanger, non-insulated, bolt-on, for E46 elliptical waveguide
- Hanger Type : Bolt-On, non-insulated
TML Value Proposition
Clamps
Cable hanger, non-insulated, bolt-on, for E38 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E60 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E78 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1 1/4" coaxial cable and eliptical waveguide E65 and E70
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E185 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 2 1/4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide ES46
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E220
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E185
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E150
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E130
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E105
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E100
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E78
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E70
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E65
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E60
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E38
Cable hanger with clamp lining for twistflex R70
Cable hanger with clamp lining for twistflex R320
Cable hanger with clamp lining for twistflex R260
Cable hanger with clamp lining for twistflex R220
Cable hanger with clamp lining for twistflex R140
Cable hanger with clamp lining for twistflex R120
Cable hanger with clamp lining for twistflex R100
Cable hanger with clamp lining for twistflex R84
Cable hanger with clamp lining for twistflex R48
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 5" coaxial cable
Cable hanger, non-insulated, bolt-on, for 7/8" coaxial cable and E100, E105 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1/2" coaxial cable and elliptical waveguide
Installation Hardware
Angle Member Adapter Kit 3/8" (SS) (Kit of 10)
Ceiling adapter, 305mm (12") (kit of 5), 3/8"
Ceiling adapter, 610mm (24") (kit of 5), 3/8"
Wall Feedthrough Sealing
Wall/Roof Feedthrough E46
4" Feed Through Boot Assembly w/1 hole for E46 Waveguide
Grounding Kit
Grounding Kit, Pre-formed Copper Strap for ES46
Grounding kit for FLEXWELL® Elliptical Waveguide ES46
Tools
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Lace-Up
Flanging die for use with FLEXWELL® waveguide ES46, basic tool
Basic tool for E38 to E130
CLAMP-060
Cable hanger, non-insulated, bolt-on, for E60 elliptical waveguide
- Hanger Type : Bolt-On, non-insulated
TML Value Proposition
Clamps
Cable hanger, non-insulated, bolt-on, for E38 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E46 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E78 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1 1/4" coaxial cable and eliptical waveguide E65 and E70
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E185 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 2 1/4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide ES46
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E220
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E185
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E150
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E130
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E105
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E100
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E78
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E70
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E65
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E60
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E38
Cable hanger with clamp lining for twistflex R70
Cable hanger with clamp lining for twistflex R320
Cable hanger with clamp lining for twistflex R260
Cable hanger with clamp lining for twistflex R220
Cable hanger with clamp lining for twistflex R140
Cable hanger with clamp lining for twistflex R120
Cable hanger with clamp lining for twistflex R100
Cable hanger with clamp lining for twistflex R84
Cable hanger with clamp lining for twistflex R48
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 5" coaxial cable
Cable hanger, non-insulated, bolt-on, for 7/8" coaxial cable and E100, E105 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1/2" coaxial cable and elliptical waveguide
Installation Hardware
Angle Member Adapter Kit 3/8" (SS) (Kit of 10)
Ceiling adapter, 305mm (12") (kit of 5), 3/8"
Ceiling adapter, 610mm (24") (kit of 5), 3/8"
Wall Feedthrough Sealing
Wall/Roof Feedthrough E60/EP60
4" Feed Through Boot Assembly w/1 hole for E60
Wall Feed Thru for FLEXWELL® Elliptical Waveguide E58 and E60
Grounding Kit
Grounding Kit, Pre-formed Copper Strap, for E60
Grounding Kit, Pre-formed Copper Strap, for E60
Grounding kit for FLEXWELL® Elliptical Waveguide E60
Tools
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Closed Lacing
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Lace-Up
Flanging die for use with FLEXWELL® waveguide E60, basic tool
Basic tool for E38 to E130
CLAMP-078
Cable hanger, non-insulated, bolt-on, for E78 elliptical waveguide
- Hanger Type : Bolt-On, non-insulated
TML Value Proposition
Clamps
Cable hanger, non-insulated, bolt-on, for E38 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E46 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E60 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1 1/4" coaxial cable and eliptical waveguide E65 and E70
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E185 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 2 1/4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide ES46
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E220
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E185
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E150
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E130
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E105
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E100
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E78
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E70
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E65
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E60
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E38
Cable hanger with clamp lining for twistflex R70
Cable hanger with clamp lining for twistflex R320
Cable hanger with clamp lining for twistflex R260
Cable hanger with clamp lining for twistflex R220
Cable hanger with clamp lining for twistflex R140
Cable hanger with clamp lining for twistflex R120
Cable hanger with clamp lining for twistflex R100
Cable hanger with clamp lining for twistflex R84
Cable hanger with clamp lining for twistflex R48
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 5" coaxial cable
Cable hanger, non-insulated, bolt-on, for 7/8" coaxial cable and E100, E105 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1/2" coaxial cable and elliptical waveguide
Installation Hardware
Angle Member Adapter Kit 3/8" (SS) (Kit of 10)
Ceiling adapter, 305mm (12") (kit of 5), 3/8"
Ceiling adapter, 610mm (24") (kit of 5), 3/8"
Wall Feedthrough Sealing
Wall/Roof Feedthrough E78/EP78
4" Feed Through Boot Assembly w/1 hole for E78
Wall Feed Thru for FLEXWELL® Elliptical Waveguide E78 and EO15
Grounding Kit
Grounding Kit, Pre-formed Copper Strap, for E78
Grounding Kit, Pre-formed Copper Strap, for E78
Grounding kit for FLEXWELL® Elliptical Waveguide E78
Tools
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Lace-Up
Flanging die for use with FLEXWELL® waveguide E78, basic tool
Basic tool for E38 to E130
CLAMP-105
Cable hanger, non-insulated, bolt-on, for 7/8" coaxial cable and E100, E105 elliptical waveguide
- Hanger Type : Bolt-On, non-insulated
- Cable Type : Coaxial Foam Dielectric, Radiating Cable, Hybrid
- Cable Size : 7/8
TML Value Proposition
Clamps
Cable hanger, non-insulated, bolt-on, for E38 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E46 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E60 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E78 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1 1/4" coaxial cable and eliptical waveguide E65 and E70
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E185 elliptical waveguide
Cable hanger for HELIFLEX® Air-dielectric coaxial cable
Cable hanger for HELIFLEX® Air-dielectric coaxial cable
Cable hanger for HELIFLEX® Air-dielectric coaxial cable
Cable hanger, non-insulated, bolt-on, for 2 1/4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
RSB Clip with clamp lining for FLEXWELL® Elliptical Waveguide E105
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide ES46
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E220
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E185
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E150
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E130
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E105
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E100
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E78
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E70
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E65
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E60
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E38
Double Multi-block hanger three layers, with angle member adapter
Double Multi-block hanger one layer, with angle member adapter
Single Multi-block hanger one layer, with angle member adapter
Single Multi-block hanger two layer, with angle member adapter
Single Multi-block hanger three layer, with angle member adapter
Cable hanger with clamp lining for twistflex R70
Cable hanger with clamp lining for twistflex R320
Cable hanger with clamp lining for twistflex R260
Cable hanger with clamp lining for twistflex R220
Cable hanger with clamp lining for twistflex R140
Cable hanger with clamp lining for twistflex R120
Cable hanger with clamp lining for twistflex R100
Cable hanger with clamp lining for twistflex R84
Cable hanger with clamp lining for twistflex R48
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 5" coaxial cable
Clic clamp for RADIAFLEX® 7/8"
Snap-In Hangers, 7/8", stainless steel (kit of 10)
Stackable Snap-In Hangers, 7/8", stainless steel (kit of 10)
SFS clamp for RADIAFLEX® 7/8"
Cable hanger, non-insulated, bolt-on, for 1/2" coaxial cable and elliptical waveguide
Grounding Kit
Connector grounding kit
Grounding Kit, Pre-formed Copper Strap, for E105
High speed grounding kit for CELLFLEX® LCF 78
Grounding Kit, Pre-formed Copper Strap
Grounding Kit, Pre-formed Copper Strap, 1.5m (60") for CELLFLEX® 7/8" Cable
Grounding Kit, Pre-formed Copper Strap, for E105
Grounding Kit, Pre-formed Copper Strap, for E46 / ES46
Grounding Kit, Pre-formed Copper Strap, for E38
Grounding kit for FLEXWELL® Elliptical Waveguide E105
Grounding kit for FLEXWELL® Elliptical Waveguide E100
Installation Hardware
Angle Member Adapter Kit 3/8" (SS) (Kit of 10)
Ceiling adapter, 305mm (12") (kit of 5), 3/8"
Ceiling adapter, 610mm (24") (kit of 5), 3/8"
Wall Feedthrough Sealing
Feed through assemblies for 7/8" coaxial cable, 102mm (4"), 1-entry
Feed through assemblies for 7/8" coaxial cable, 102mm (4"), 2-entries
Feed through assemblies for 7/8" coaxial cable, 102mm (4"), 3-entries
Feed through assemblies for 7/8" coaxial cable, 102mm (4"), 4-entries
Wall/Roof Feedthrough E105/EP105
Wall feed through (without feed through plate)
4" Feed Through Boot Assembly w/1 hole for E105
Wall Feed Thru for FLEXWELL® Elliptical Waveguide E105 and EO19
Wall Feed Thru for FLEXWELL® Elliptical Waveguide E100
Coaxial Transmission Line
7/8" HELIFLEX® Air-Dielectric Coaxial Cable, flame retardant/ halogen free jacket
7/8" HELIFLEX® Air-Dielectric Coaxial Cable
7/8" HELIFLEX® Air-Dielectric Coaxial Cable
7/8" CELLFLEX® Premium Attenuation Low-Loss Foam-Dielectric Coaxial Cable
7/8" CELLFLEX® Premium Attenuation Low-Loss Foam-Dielectric Coaxial Cable
7/8" CELLFLEX® Premium Attenuation Low-Loss Foam-Dielectric Coaxial Cable
Tools
Stripping tool for high speed grounding kit GKSPEED-78 series
Hand tool kit for the installation of connectors and grounding kits on CELLFLEX® Cables
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Closed Lacing
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Lace-Up
Compact tool for E105 to E380
Automated trimming tool, LCF78, UCF 78, OMNI FIT Premium, Trim Series D01
Flanging die for use with FLEXWELL® waveguide E105, compact tool
Flanging die for use with FLEXWELL® waveguide E105, basic tool
Basic tool for E38 to E130
Flaring Tool LCF 7/8" for Universal Trimming Tools
Connectors
7-16 DIN Female Connector for 7/8" Coaxial Cable, RAPID FIT™ Sealing compound
7-16 DIN Male Connector for 7/8" Coaxial Cable, RAPID FIT™ Sealing compound
7/8" EIA Connector for 7/8" Coaxial Cable, Gas pass, Sealing compound
N Female Connector for 7/8" Coaxial Cable, RAPID FIT™ Sealing compound
4.3-10 Female Connector for 1/2" Coaxial Cable, OMNI FIT™ standard, O-ring sealing
N Male Connector for 7/8" Coaxial Cable, OMNI FIT™ Premium,
Straight, O-Ring and compression sealing
N Female Connector for 7/8" Coaxial Cable, OMNI FIT™ Premium,
Straight, O-Ring and compression sealing
7-16 DIN Male Connector for 7/8" Coaxial Cable, OMNI FIT™ Premium,
Right Angle, O-Ring and compression sealing
7-16 DIN Male Connector for 7/8" Coaxial Cable, OMNI FIT™ Premium,
Straight, O-Ring and compression sealing
7-16 DIN Female Connector for 7/8" Coaxial Cable, OMNI FIT™ Premium, Straight, O-Ring and compression sealing
4.3-10 Male Straight Connector for 7/8" Coaxial Cable, OMNI FIT™ Premium, Polymer claw and compression sealing
4.3-10 Female Straight Connector for 7/8" Coaxial Cable, OMNI FIT™ Premium, Polymer claw and compression sealing
N Male Connector for 7/8" Coaxial Cable, OMNI FIT™ standard, O-ring sealing
7-16 DIN Female Connector for 7/8" Coaxial Cable, OMNI FIT™ standard, O-ring sealing
N Male Connector for 7/8" Coaxial Cable, OMNI FIT™ standard, O-ring sealing
N Female Connector for 7/8" Coaxial Cable, OMNI FIT™ standard, O-ring sealing
7-16 Male Connector for 7/8" Coaxial Cable, OMNI FIT™ standard, O-ring sealing
7-16 DIN Female Connector for 7/8" Coaxial Cable, OMNI FIT™ standard, O-ring sealing
4.3-10 Male Push-Pull Connector for 7/8" Coaxial Cable, OMNI FIT™ standard, O-ring sealing
4.3-10 Male Connector for 7/8" Coaxial Cable, OMNI FIT™ standard, O-ring sealing
4.3-10 Male Hand-Screw Connector for 7/8" Coaxial Cable, OMNI FIT™ standard, O-ring sealing
4.3-10 Female Connector for 7/8" Coaxial Cable, OMNI FIT™ standard, O-ring sealing
7-16 DIN Male Connector for 7/8" Coaxial Cable, OMNI FIT™ Premium,
Straight, O-Ring and compression sealing
7-16 DIN Female Connector for 7/8" Coaxial Cable, OMNI FIT™ Premium, Straight, O-Ring and compression sealing
4.3-10 Female Straight Connector for 7/8" Coaxial Cable, OMNI FIT™ Premium, O-Ring and compression sealing
4.3-10 Male Straight Connector for 7/8" Coaxial Cable, OMNI FIT™ Premium, O-Ring and compression sealing
N Male Connector for 7/8" Coaxial Cable, OMNI FIT™ Premium,
Straight, O-Ring and 360° compression sealing
N Female Connector for 7/8" Coaxial Cable, OMNI FIT™ Premium,
Straight, O-Ring and 360° compression sealing
CLAMP-114
Cable hanger, non-insulated, bolt-on, for 1 1/4" coaxial cable and eliptical waveguide E65 and E70
- Hanger Type : Bolt-On, non-insulated
- Cable Type : Coaxial Foam Dielectric, Radiating Cable, Hybrid
- Cable Size : 1-1/4
CLAMP-150
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
- Hanger Type : Bolt-On, non-insulated
TML Value Proposition
Clamps
Cable hanger, non-insulated, bolt-on, for E38 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E46 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E60 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E78 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1 1/4" coaxial cable and eliptical waveguide E65 and E70
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E185 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 2 1/4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
RSB Clip with clamp lining for FLEXWELL® Elliptical Waveguide E130
RSB Clip with clamp lining for FLEXWELL® Elliptical Waveguide E150
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide ES46
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E220
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E185
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E150
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E130
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E105
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E100
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E78
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E70
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E65
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E60
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E38
Cable hanger with clamp lining for twistflex R70
Cable hanger with clamp lining for twistflex R320
Cable hanger with clamp lining for twistflex R260
Cable hanger with clamp lining for twistflex R220
Cable hanger with clamp lining for twistflex R140
Cable hanger with clamp lining for twistflex R120
Cable hanger with clamp lining for twistflex R100
Cable hanger with clamp lining for twistflex R84
Cable hanger with clamp lining for twistflex R48
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 5" coaxial cable
Cable hanger, non-insulated, bolt-on, for 7/8" coaxial cable and E100, E105 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1/2" coaxial cable and elliptical waveguide
Installation Hardware
Angle Member Adapter Kit 3/8" (SS) (Kit of 10)
Ceiling adapter, 305mm (12") (kit of 5), 3/8"
Ceiling adapter, 610mm (24") (kit of 5), 3/8"
Wall Feedthrough Sealing
Wall/Roof Feedthrough E130/EP130
Wall/Roof Feedthrough E150/EP150
4" Feed Through Boot Assembly w/1 hole for E150 Waveguide
4" Feed Through Boot Assembly w/1 hole for E130
Wall Feed Thru for FLEXWELL® Elliptical Waveguide E150
Wall Feed Thru for FLEXWELL® Elliptical Waveguide E130
Grounding Kit
Grounding Kit, Pre-formed Copper Strap, for E130
Grounding Kit, Pre-formed Copper Strap, for E150
Grounding Kit, Pre-formed Copper Strap, for E185
Grounding Kit, Pre-formed Copper Strap, for E150
Grounding Kit, Pre-formed Copper Strap, for E130
Grounding kit for FLEXWELL® Elliptical Waveguide E150
Grounding kit for FLEXWELL® Elliptical Waveguide E130
Tools
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Lace-Up
Compact tool for E105 to E380
Flanging die for use with FLEXWELL® waveguide E130, compact tool
Flanging die for use with FLEXWELL® waveguide E150, compact tool
Flanging die for use with FLEXWELL® waveguide E130, basic tool
Basic tool for E38 to E130
CLAMP-185
Cable hanger, non-insulated, bolt-on, for E185 elliptical waveguide
- Hanger Type : Bolt-On, non-insulated
TML Value Proposition
Clamps
Cable hanger, non-insulated, bolt-on, for E38 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E46 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E60 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E78 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1 1/4" coaxial cable and eliptical waveguide E65 and E70
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 2 1/4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
RSB Clip with clamp lining for FLEXWELL® Elliptical Waveguide E185
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide ES46
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E220
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E185
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E150
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E130
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E105
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E100
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E78
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E70
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E65
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E60
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E38
Cable hanger with clamp lining for twistflex R70
Cable hanger with clamp lining for twistflex R320
Cable hanger with clamp lining for twistflex R260
Cable hanger with clamp lining for twistflex R220
Cable hanger with clamp lining for twistflex R140
Cable hanger with clamp lining for twistflex R120
Cable hanger with clamp lining for twistflex R100
Cable hanger with clamp lining for twistflex R84
Cable hanger with clamp lining for twistflex R48
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 5" coaxial cable
Cable hanger, non-insulated, bolt-on, for 7/8" coaxial cable and E100, E105 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1/2" coaxial cable and elliptical waveguide
Installation Hardware
Angle Member Adapter Kit 3/8" (SS) (Kit of 10)
Ceiling adapter, 305mm (12") (kit of 5), 3/8"
Ceiling adapter, 610mm (24") (kit of 5), 3/8"
Wall Feedthrough Sealing
Wall/Roof Feedthrough E185/EP185
4" Feed Through Boot Assembly w/1 hole for E185
Wall Feed Thru for FLEXWELL® Elliptical Waveguide E185
Grounding Kit
Grounding Kit, Pre-formed Copper Strap, for E185
Grounding kit for FLEXWELL® Elliptical Waveguide E185
Tools
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Closed Lacing
Compact tool for E105 to E380
Flanging die for use with FLEXWELL® waveguide E185, compact tool
CLAMP-R-038
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E38
- Hanger Type : Basic clamp with clamp lining
TML Value Proposition
Clamps
Cable hanger, non-insulated, bolt-on, for E38 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E46 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E60 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E78 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1 1/4" coaxial cable and eliptical waveguide E65 and E70
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E185 elliptical waveguide
Universal clamping plate for anchor bar installation including screw M8
Cable hanger, non-insulated, bolt-on, for 2 1/4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide ES46
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E220
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E185
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E150
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E130
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E105
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E100
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E78
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E70
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E65
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E60
Cable hanger with clamp lining for twistflex R70
Cable hanger with clamp lining for twistflex R320
Cable hanger with clamp lining for twistflex R260
Cable hanger with clamp lining for twistflex R220
Cable hanger with clamp lining for twistflex R140
Cable hanger with clamp lining for twistflex R120
Cable hanger with clamp lining for twistflex R100
Cable hanger with clamp lining for twistflex R84
Cable hanger with clamp lining for twistflex R48
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 5" coaxial cable
Cable hanger, non-insulated, bolt-on, for 7/8" coaxial cable and E100, E105 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1/2" coaxial cable and elliptical waveguide
Wall Feedthrough Sealing
Wall/Roof Feedthrough E38/EP38
Wall Feed Thru for FLEXWELL® Elliptical Waveguide E38
Grounding Kit
Grounding Kit Pre-formed Copper Strap for E38
Grounding kit for FLEXWELL® Elliptical Waveguide E38
Tools
Flanging die for use with FLEXWELL® waveguide E38, basic tool
Basic tool for E38 to E130
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Lace-Up
CLAMP-R-046
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E46
- Hanger Type : Basic clamp with clamp lining
CLAMP-R-060
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E60
- Hanger Type : Basic clamp with clamp lining
TML Value Proposition
Clamps
Cable hanger, non-insulated, bolt-on, for E38 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E46 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E60 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E78 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1 1/4" coaxial cable and eliptical waveguide E65 and E70
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E185 elliptical waveguide
Universal clamping plate for anchor bar installation including screw M8
Cable hanger, non-insulated, bolt-on, for 2 1/4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide ES46
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E220
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E185
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E150
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E130
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E105
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E100
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E78
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E70
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E65
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E38
Cable hanger with clamp lining for twistflex R70
Cable hanger with clamp lining for twistflex R320
Cable hanger with clamp lining for twistflex R260
Cable hanger with clamp lining for twistflex R220
Cable hanger with clamp lining for twistflex R140
Cable hanger with clamp lining for twistflex R120
Cable hanger with clamp lining for twistflex R100
Cable hanger with clamp lining for twistflex R84
Cable hanger with clamp lining for twistflex R48
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 5" coaxial cable
Cable hanger, non-insulated, bolt-on, for 7/8" coaxial cable and E100, E105 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1/2" coaxial cable and elliptical waveguide
Wall Feedthrough Sealing
Wall/Roof Feedthrough E60/EP60
4" Feed Through Boot Assembly w/1 hole for E60
Wall Feed Thru for FLEXWELL® Elliptical Waveguide E58 and E60
Grounding Kit
Grounding Kit, Pre-formed Copper Strap, for E60
Grounding Kit, Pre-formed Copper Strap, for E60
Grounding kit for FLEXWELL® Elliptical Waveguide E60
Tools
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Closed Lacing
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Lace-Up
Flanging die for use with FLEXWELL® waveguide E60, basic tool
Basic tool for E38 to E130
CLAMP-R-065
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E65
- Hanger Type : Basic clamp with clamp lining
TML Value Proposition
Clamps
Cable hanger, non-insulated, bolt-on, for E38 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E46 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E60 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E78 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1 1/4" coaxial cable and eliptical waveguide E65 and E70
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E185 elliptical waveguide
Universal clamping plate for anchor bar installation including screw M8
Cable hanger, non-insulated, bolt-on, for 2 1/4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide ES46
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E220
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E185
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E150
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E130
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E105
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E100
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E78
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E70
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E60
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E38
Cable hanger with clamp lining for twistflex R70
Cable hanger with clamp lining for twistflex R320
Cable hanger with clamp lining for twistflex R260
Cable hanger with clamp lining for twistflex R220
Cable hanger with clamp lining for twistflex R140
Cable hanger with clamp lining for twistflex R120
Cable hanger with clamp lining for twistflex R100
Cable hanger with clamp lining for twistflex R84
Cable hanger with clamp lining for twistflex R48
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 5" coaxial cable
Cable hanger, non-insulated, bolt-on, for 7/8" coaxial cable and E100, E105 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1/2" coaxial cable and elliptical waveguide
Wall Feedthrough Sealing
Wall/Roof Feedthrough E65/EP65
4" Feed Through Boot Assembly w/1 hole for E65
Wall Feed Thru for FLEXWELL® Elliptical Waveguide E65
Grounding Kit
Grounding Kit, Pre-formed Copper Strap, for E65
Grounding Kit, Pre-formed Copper Strap, for E65
Grounding kit for FLEXWELL® Elliptical Waveguide E65
Tools
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Closed Lacing
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Lace-Up
Flanging die for use with FLEXWELL® waveguide E65, basic tool
Basic tool for E38 to E130
CLAMP-R-070
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E70
- Hanger Type : Basic clamp with clamp lining
TML Value Proposition
Clamps
Cable hanger, non-insulated, bolt-on, for E38 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E46 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E60 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E78 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1 1/4" coaxial cable and eliptical waveguide E65 and E70
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E185 elliptical waveguide
Universal clamping plate for anchor bar installation including screw M8
Cable hanger, non-insulated, bolt-on, for 2 1/4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide ES46
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E220
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E185
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E150
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E130
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E105
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E100
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E78
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E65
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E60
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E38
Cable hanger with clamp lining for twistflex R70
Cable hanger with clamp lining for twistflex R320
Cable hanger with clamp lining for twistflex R260
Cable hanger with clamp lining for twistflex R220
Cable hanger with clamp lining for twistflex R140
Cable hanger with clamp lining for twistflex R120
Cable hanger with clamp lining for twistflex R100
Cable hanger with clamp lining for twistflex R84
Cable hanger with clamp lining for twistflex R48
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 5" coaxial cable
Cable hanger, non-insulated, bolt-on, for 7/8" coaxial cable and E100, E105 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1/2" coaxial cable and elliptical waveguide
Tools
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Lace-Up
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Closed Lacing
Flanging die for use with FLEXWELL® waveguide E70, basic tool
Basic tool for E38 to E130
Wall Feedthrough Sealing
Wall Feed Thru for FLEXWELL® Elliptical Waveguide E70
Grounding Kit
Grounding kit for FLEXWELL® Elliptical Waveguide E70
CLAMP-R-078-E
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E78
- Hanger Type : Basic clamp with clamp lining
TML Value Proposition
Clamps
Cable hanger, non-insulated, bolt-on, for E38 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E46 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E60 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E78 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1 1/4" coaxial cable and eliptical waveguide E65 and E70
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E185 elliptical waveguide
Universal clamping plate for anchor bar installation including screw M8
Cable hanger, non-insulated, bolt-on, for 2 1/4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide ES46
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E220
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E185
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E150
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E130
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E105
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E100
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E70
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E65
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E60
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E38
Cable hanger with clamp lining for twistflex R70
Cable hanger with clamp lining for twistflex R320
Cable hanger with clamp lining for twistflex R260
Cable hanger with clamp lining for twistflex R220
Cable hanger with clamp lining for twistflex R140
Cable hanger with clamp lining for twistflex R120
Cable hanger with clamp lining for twistflex R100
Cable hanger with clamp lining for twistflex R84
Cable hanger with clamp lining for twistflex R48
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 5" coaxial cable
Cable hanger, non-insulated, bolt-on, for 7/8" coaxial cable and E100, E105 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1/2" coaxial cable and elliptical waveguide
Wall Feedthrough Sealing
Wall/Roof Feedthrough E78/EP78
4" Feed Through Boot Assembly w/1 hole for E78
Wall Feed Thru for FLEXWELL® Elliptical Waveguide E78 and EO15
Grounding Kit
Grounding Kit, Pre-formed Copper Strap, for E78
Grounding Kit, Pre-formed Copper Strap, for E78
Grounding kit for FLEXWELL® Elliptical Waveguide E78
Tools
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Lace-Up
Flanging die for use with FLEXWELL® waveguide E78, basic tool
Basic tool for E38 to E130
CLAMP-R-100
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E100
- Hanger Type : Basic clamp with clamp lining
TML Value Proposition
Clamps
Cable hanger, non-insulated, bolt-on, for E38 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E46 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E60 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E78 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1 1/4" coaxial cable and eliptical waveguide E65 and E70
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E185 elliptical waveguide
Universal clamping plate for anchor bar installation including screw M8
Cable hanger, non-insulated, bolt-on, for 2 1/4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide ES46
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E220
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E185
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E150
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E130
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E105
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E78
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E70
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E65
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E60
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E38
Cable hanger with clamp lining for twistflex R70
Cable hanger with clamp lining for twistflex R320
Cable hanger with clamp lining for twistflex R260
Cable hanger with clamp lining for twistflex R220
Cable hanger with clamp lining for twistflex R140
Cable hanger with clamp lining for twistflex R120
Cable hanger with clamp lining for twistflex R100
Cable hanger with clamp lining for twistflex R84
Cable hanger with clamp lining for twistflex R48
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 5" coaxial cable
Cable hanger, non-insulated, bolt-on, for 7/8" coaxial cable and E100, E105 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1/2" coaxial cable and elliptical waveguide
Tools
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Closed Lacing
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Lace-Up
Basic tool for E38 to E130
Wall Feedthrough Sealing
Wall Feed Thru for FLEXWELL® Elliptical Waveguide E100
Grounding Kit
Grounding kit for FLEXWELL® Elliptical Waveguide E100
CLAMP-R-105
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E105
- Hanger Type : Basic clamp with clamp lining
TML Value Proposition
Clamps
Cable hanger, non-insulated, bolt-on, for E38 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E46 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E60 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E78 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1 1/4" coaxial cable and eliptical waveguide E65 and E70
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E185 elliptical waveguide
Universal clamping plate for anchor bar installation including screw M8
Cable hanger, non-insulated, bolt-on, for 2 1/4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
RSB Clip with clamp lining for FLEXWELL® Elliptical Waveguide E105
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide ES46
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E220
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E185
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E150
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E130
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E100