HB078-1-06S3-M6J
HYBRIFLEX Direct LTE, Cabling Solution for 3 RRU

Rev : C | Rev date : 12 Aug 2014
RFS' HYBRIFLEX cabling solution for Remote Radio Unit (RRU) combines optical fiber and DC power in a single lightweight aluminum corrugated cable, making it the world's most innovative solution for RRU deployments. It was developed to reduce installation complexity and cost at Cellular sites.
HYBRIFLEX cabling solutions allows mobile operators deploying RRU architecture to standardized installation process and eliminates the need and the cost for an internal grounding wire.
The HYBRIFLEX cable is part of a site installation kit. It consists of an armored bundle of 3 shielded DC cables, 3 F/O distribution cables and a rip cord to adjust the breakout part of the cable.

FEATURES / BENEFITS

  • A corrugated armor with excellent bending characteristics minimizes installation time and enables mechanical protection and EMC shielding
  • Outer conductor grounding eliminates typical additional grounding requirement and saves on installation costs
  • Lightweight solution and compact design decreases tower loads
  • Robust cabling eliminates need for expensive cable trays and conduits
  • Installation of stripped fiber optic cable pairs directly to RRH reduces CAPEX and wind load by eliminating need for junction boxes
  • F/O and DC housed in single corrugated cable saves CAPEX by standardizing RRH cable installation and reducing installation equipments


HYBRIFLEX Series

Technical features

Structure

Cable Type3 RRU HYBRIFLEX™ Direct LTE
Size7/8
Fire PerformanceHalogene Free

Mechanical Specifications

Outer Diameter Nominal mm (in)27.8 (1.09)
Cable Weight kg/m (lb/ft)0.85 (0.57)
Minimum Bending Radius, (Operating)mm (in)120 (4.7)
Minimum Bending Radius, (Installation)mm (in)250 (9.8)
Tensile Strength N (lb)700 (157)
Recommended / Maximum Clamp Spacing m (ft)0.8 / 1 (2.75 / 3.3)

DC Power Cable Specifications

Number of DC Pairs3
Maximum DC-Resistance Power Cable Ω/km (Ω/kft)3.3 (1)
Cross Section of Power Cable mm² (AWG)6 (10)
Shieldingbraid
DC Wire Jacket MaterialPolyethylene, PE, Metalhydroxite Filling
DC Wire Jacket Thickness mm (in)0.5 (0.02)
DC Cable Single Bending Radius mm (in)100 (3.94)
DC Cable Diameter mm (in)9.9 (0.39)
DC Cable JacketUV stable black PE
DC Standards (Meets or Exceeds)IEC 60232

Cable Jacket

UV-Protection Individual and External JacketYes
Jacket MaterialUV stable black PE

Armor Specifications

Armor TypeCorrugated Aluminum tube
Maximum DC-Resistance of Armor Ω/km (Ω/kft)1.21 (0.37)
Copper Equivalent Cross Section of Armor mm² (AWG)16 (5)
Diameter Corrugated Armor mm (in)25.2 (0.99)

F/O Cable Specifications

F/O Cable TypeTight-Buffer, Multimode
Number of F/O Pairs6
Core/Clad µm50 /125
Secondary Protection Nominal µm (in)900 (0.035)
Single Bending Radius mm (in)50 (1.97)
Cable Diameter mm (in)4.8 (0.19)
F/O Cable JacketUV stable black PE
F/O Standards (Meets or Exceeds)ITU-T G.657

Testing and Environmental

Storage Temperature °C (°F)-40 to 85 (-40 to 185 )
Operation Temperature °C (°F)-40 to 85 (-40 to 185 )
Installation Temperature °C (°F)-20 to 50 (-4 to 122 )
Jacket Specificationsnot applicable
LSZH Specificationnot applicable


Product Detail