Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable

Rev : F | Rev date : 13 Jul 2023

Hanger, non-insulated, bolt-on for coaxial cable LCF158 and HCA158 and as fire resistance support for RCF158 and all RADIAFLEX® 1 5/8" with copper foil as outer conductor.
Made of stainless steel


  • Stainless steel hangers for supporting coaxial cable to tower.
  • Member mounting holes with up to M10 or 3/8""-16 hardware.
  • Hanger may be attached to angle adapters, tower standoffs.
  • Hanger may be attached to round member adapters through slot.
  • Installation every 10m (30ft) as fire resistance support for RADIAFLEX®. Keep's the RADIAFLEX® cable in position during fire impact to prevent potential blocking of escape path. All installation components should be made of stainless steel.

External Document Links


If using the Bolt-on hanger series in vertical runs, the hoisting grips need to be kept on the tower.

* Valid for all 1 5/8" types

Technical features

General Specifications

Product LineCoaxial Cable Accessories
Product TypeHanger
Hanger TypeBolt-On, non-insulated
Transmission Line TypeLCF158, HCA158, RCF158
Cable TypeCoaxial Foam Dielectric
Air Dielectric

Mechanical Specifications

Cable Size1-5/8"
Number of Cable / Waveguide Runs1
MaterialStainless Steel
Recommended / Maximum Clamp Spacing m (ft)0.8 / 1.2 (2.75 / 4)

Temperature Specifications

Operation Temperature °C (°F)-50 to 85 (-58 to 185 )
Storage Temperature °C (°F)-50 to 85 (-58 to 185 )

Packaging Information

Package Quantity10